Bush LE-55GV350-B1, Инструкция по эксплуатации

Страница: 13 / 67

13
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105 .
Getting Started
You’ll be up and running in no time
Getting Started
Installing / Removing the Base Stand
Base Stand Assembly Instruction
1. Place TV display side down, Whilst protecting the
screen, Locate at the bottom of the TV to assemble the
Stand Base (FEET) x 2
2. Fix the stand base to the TV with the 4PCS provided
screws.
INSTALLATION NOTES
This TV can be connected to an AC 100-240 Volts, 50/60
Hz power supply. Never connect straight to a DC power
supply.
Locate the TV in a room where light does not strike the
screen directly. Total darkness or a reflection on the
screen can cause eyestrain. Soft and indirect lighting is
recommended for comfortable viewing.
Allow enough space between the TV and the wall to
permit ventilation.
Avoid excessively warm locations to prevent possible
damage to the cabinet or premature component failure.
Note: For safe use the wall-mounting bracket,please 4
aluminum screws(M6*12) for attaching the TV to wall.
WALL MOUNTING INSTALLATION GUIDELINES
This television can be wall mounted as follows:
1. Place the LED Television onto a solid surface.
Please place some soft material over the front of the
screen to protect it from any damage.
2. Remove the screws (4PCS) from the lower part of the
television, where the base joins to the TV, and take
away the stand (put the stand somewhere safe for
future use).
3. Use the 4PCS provided screws to fix the TV onto a
wall mounting bracket (not included) via the four
VESA standard holes on the back of the television.
200mm
400mm
200 x 400mm VESA mount