Bush LCD32F1080P, Инструкция по эксплуатации

Страница: 40 / 51

English - 39 -
Displaying TV Information
Programme Number , Programme Name,
Sound Indicator and Zoom Mode information
is displayed on the screen when a new
programme is entered or
button is
pressed.
Mute Function
Press button to disable sound. Mute
indicator will be displayed in the upper side
of the screen.
To cancel mute, there are two alternatives; the
first one is pressing the
button and the
second one is increasing the volume level.
PIP (Picture-in-Picture) and PAP
(Picture-and-Picture) Modes
Press the button to switch to PIP mode.
At PIP Mode, a small picture (PIP picture) is
displayed on the main picture. There are 1
size and 4 positions (upper left, upper right,
bottom left and bottom right) available for the
PIP window. You can use
button to change
the PIP position. Aspect Ratio of the PIP
window is fixed and 4:3.
When PIP Mode is entered, the default active
window is the PIP window and the active
window is indicated by a white frame around
it. The active window can be changed by
pressing
 /  button. The status info OSD
belongs to active window. The place of the
status OSDs are same for both windows.
Press the button again to exit the PIP mode.
Press the button to switch to PAP mode.
At PAP Mode, two pictures with equal sizes
are displayed on the screen. Aspect Ratios of
the windows are fixed.
When you switch to PAP Mode, Main window
in PIP Mode is displayed on the right side of
the screen. The active window can be
changed by pressing
 /  button.
Press the button again to exit the PAP mode.
Source restrictions of PAP Mode are same as
in PIP Mode. It is not possible to show 2
different channels from the TV tuner at the
same time.
NOTE : In all HDMI modes, PIP and PAP are
not visible. In YPbPr 1080i, PIP is not
visible.
NOTE: See Appendix B for all PIP/PAT modes.
Picture Mode Selection
By pressing PP button, you can change
Picture Mode settings in accordance with
your viewing requirements.
Freezing Picture
You can freeze the picture on the screen.
Press the
OK button to freeze picture. Press
again to quit freeze mode.
Zoom Modes
You can change the aspect ratio of the TV for
viewing the picture in different zoom modes.
Press
/WIDE
button to directly change the
zoom mode.
Available zoom modes are listed below.
Note : In YPBPR and HDMI modes, while in
720 and 1080 resolutions, Full 1 and Full
2 modes will also be visible.
Auto
When a WSS (Wide Screen Signalling)
signal, which shows the aspect ratio of the
picture, is included in the broadcast signal or
the signal from an external device, the TV
automatically changes the
ZOOM mode
according to the WSS signal.
ENG-32761-1205UK-32 INCH 17MB26 UK IDTV-(WO SVHS-ECO PIP)(3D PANORAMA)-50138695.p65 19.11.2008, 08:34 39