ICS11BTi Instruction Manual
10
General Operations
Resetting the unit
Operating the unit for the first time or after replacing the car battery, you must reset
the unit.
Press
OPEN
button on the panel to open the panel and press
RESET
button to
restore the unit to its original factory settings.
Power on/off
Press any button (except OPEN) to turn on the unit. Press and hold the
PWR
button
on front panel to switch the unit off.
Note:
After the unit has been turned off, the volume level and radio current settings
will be memorized, and when you turn the unit on it will resume the stored status you
previously set.
Play Mode selection
Press the
MODE
button repeatedly to switch between inputs:
Tuner
CD*
USB/IPOD* SD*
AUX
IN
(* available only if there is media device in disc, SD, USB slot)
Volume control
Rotate
Volume
knob on front panel to adjust the volume to the desired level.
Turning the sound off
Press
MUTE
button on the front panel to turn the sound off, press it again to turn the
sound on.
Sound Adjustments
Press the
Select
button repeatedly to select the audio settings:
VOLUME
BASS
TREBLE BALANCE
FADER
Rotate
Volume
knob to adjust each setting, the settings are saved automatically.
Note:
If the unit is turned off, all the settings of each mode will be saved.
If cutting off battery power or resetting the unit, all the settings will return to
factory default settings.
System set up menu
Press the
Select
button and hold for more than 2 seconds to access the system
setup menu mode, and then press the
Select
button to select the menu item in
sequence as follows:
IN VOL
→
ADJ
→
CLK
→
BEEP
→
TA VOL
→
EON
→
EQ
→
LOUD
→
LOC
→
REG
→
STEREO
→
ALRM
