Bush DWFS124B, Инструкция по установке и эксплуатации, Страница: 33 / 37

If the programme won’t start
•
Check if the plug is connected.
•
Check your indoor fuses.
•
Be sure that the water inlet tap is turned on.
•
Be sure that you have closed the machine door.
•
Be sure that you switched off the machine by pressing the Power On / Off button.
•
Be sure that the water inlet filter and the machine filters are not clogged.
If detergent residues are left in the detergent compartment
Detergent has been added when the detergent compartment was wet.
If water is left inside the machine at the end of the programme
•
The water drain hose is clogged or twisted.
•
The filters are clogged.
•
The programme is not finished yet.
If the machine stops during a wash operation
•
Power failure.
•
Water inlet failure.
If shaking and hitting noises are heard during a wash operation
•
Dishes placed incorrectly.
•
Spray arm hitting the dishes.
FAILURE CODES AND WHAT TO DO IN CASE OF FAILURE
32
ERROR CODE ERROR DESCRIPTION CONTROL
P1 P2 P3 P4
Inadequate water supply

Make sure the water input tap is totally open and that there is no water cut.

Close the water input tap, separate the water input hose from the tap and
clean the filter at the connection end of the hose.

Restart your machine, contact the service if the error resumes.
Error of continuous water
input

Close the tap.

Contact a service agent .
The waste water in the
machine cannot be
discharged.

Water discharge hose is clogged.

The filters of your machine might be clogged.

Power off-on your machine and activate the program cancellation
command.

If the error continues, contact a service agent.
Intended water temperature
could not be reached faulty
heater and heater sensor
Contact a service agent.
Alarm is active against water
overflow

Power off your machine and close the tap.

Contact a service agent.
Faulty electronic card Contact a service agent.
Customer Helpline: 0345 257 7271