Bush DWFS124B, Инструкция по установке и эксплуатации, Страница: 17 / 37

Prior to using the machine for the first time
•
Check whether the electricity and supply water specifications match the values indicated by the
installation instructions for the machine.
•
Remove all packaging materials inside the machine.
•
Set the water softener.
•
Add 2 kg salt into the salt compartment and fill with water up to a level at which it will almost
overflow.
•
Fill the rinse aid compartment.
The importance of water decalcification
For a good washing function, the dishwasher needs soft, i.e. less calcareous water. Otherwise, white
lime residues will remain on the dishes and the interior equipment. This will negatively affect your
machine’s washing, drying and shining performance. When water flows through the softener system,
the ions forming the hardness are removed from the water and the water reaches the softness
required to obtain the best washing result. Depending on the level of hardness of the inflowing water,
these ions that harden the water accumulate rapidly inside the softener system. Therefore, the
softener system has to be refreshed so that it operates with the same performance also during the
next wash. For this purpose, dishwasher salt is used.
Filling with salt
Use softener salt specifically produced
for use in dishwashers. To fill softener
salt, first remove the lower basket and
then open the salt compartment cap by
turning it counter clockwise. (Diagram 1)
2 At first fill the compartment with 2kg
salt and water so it just overflows
(Diagrams 2 and 3 ) the funnel provided
will make filling 4 easier. Refit the cap and
close it. If the salt warning lamp on the
control panel is lit fill the salt compartment
with salt again.
Fill the salt compartment with water
on first use only.
If you put a tablet into the salt
compartment, do not fill the
compartment completely. We
recommend that you use small-grained
or powder softener salt.
Do not put table salt into your machine,
otherwise, the function of the softener
compartment may decrease over time. When you start your dishwasher, the salt compartment gets
filled with water. Therefore, put the softener salt prior to starting your machine.
This way, overflowing salt gets immediately cleaned up through the wash operation. If you are not
going to wash any dishes immediately after putting in salt, then run a short washing program with an
empty machine in order to avoid any damage ( to prevent corrosion ) to your machine due to the salt
overflow while filling in the salt container.
PREPARING THE MACHINE FOR USE
16
SALT
Customer Helpline: 0345 257 7271