Bush DAB-1507, Инструкция по эксплуатации

Страница: 17 / 23

Using your Stereo DAB/FM Radio
Using your Stereo DAB/FM Radio
32
33
section of these instructions, or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 600 3021.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the
Troubleshooting
Using your Stereo DAB/FM Radio
Let’s get started
Using your Stereo DAB/FM Radio
Let’s get started
5. In the top right of the radio display the number of minutes until your radio will switch
to Standby mode automatically will be displayed e.g. S90.
Cancel the Sleep timer
With your radio switched on (not in Standby mode):
Follow the steps for ‘Sleep timer’ and select ‘Off’ in step 4.
Display backlight timeout
You can adjust the display backlight timeout. Options of permanently On, 10, 20, 30,
45, 60, 90, 120, and 180 seconds are available. The current setting will have an ‘*’ in the
display.
With your radio switched on (not in Standby mode):
1. Press and release the Menu button to enter the menu options.
2. Use the Tune/Select control to scroll to <System>. Press to Select.
3. Use the Tune/Select control to scroll to <Backlight>. Press to Select.
4. <Timeout> is displayed. Press the Tune/Select control. Use the Tune/Select control to
scroll through the available backlight timeout options of On, 10, 20, 30, 45, 60, 90, 120
or 180 seconds. Stop when the backlight timeout you would like is displayed and press
to Select. <Timeout> will be displayed.
You can now use the Tune/Select control to scroll and Select, as you did to set the
Backlight timeout, to change the settings for the backlight brightness for the <Dim
level> and <On level>. There are 3 options available, High, Medium and Low.
Display language
You can change the display language of your radio, there are 4 options available; English,
French, German and Italian. An ‘*’ will be displayed next to the current setting.
With your radio switched on (not in Standby mode):
1. Press and release the Menu button to enter the menu options
2. Use the Tune/Select control to scroll to <System>. Press to Select.
3. Use the Tune/Select control to scroll to <Language>. Press to Select.
4. Use the Tune/Select control to scroll to the language you would like. Press to Select.