Bush DAB-1507, Инструкция по эксплуатации

Страница: 13 / 23

Using your Stereo DAB/FM Radio
Using your Stereo DAB/FM Radio
24
25
section of these instructions, or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 600 3021.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the
Troubleshooting
Using your Stereo DAB/FM Radio
Let’s get started
Using your Stereo DAB/FM Radio
Let’s get started
4. Press the Tune/Select control to Select. The display will confirm Preset X stored,
where ‘X’ is the number of the preset (1-10).
Note:
If there is already an existing DAB station stored under a preset, it will be over
written when you store the new station.
Tune to a DAB preset station
In DAB mode:
Note: To quickly access the radio stations stored under Preset locations 1 or 2, you can
just press and release the ‘1’ or ‘2’ button, as appropriate, on the front of your radio.
1. Press and release the Preset button. Preset Recall <1:> is displayed together with the
name or frequency of the station stored there, or (Empty) if no previous station has
been stored.
2. Use the Tune/Select control to move to the Preset location and station that you would
like to listen to (1-10).
3. Press the Tune/Select control to Select. The radio will instantly tune to that station and
begin to play.
Note: If no DAB station has been stored under the preset button, ‘Preset Empty’ will be
displayed, then the radio will revert to the previously selected radio station.
DAB display information
When listening to a DAB station you can change the information that will appear on the
display. There are several different types of information that are sent by the broadcaster.
• Dynamic Label Segment (DLS) - this is scrolling text information supplied by the
broadcaster. Information could be the name of an artist or music title, DJ’s name,
contact details for the radio station etc.
• Signal Strength - An empty will appear on the display to indicate the minimum
signal strength for acceptable listening. The row of solid rectangles indicates the actual
signal strength that you are receiving. The stronger the signal, the further to the right
the row of solid rectangles will be.
• Program Type (PTY) - such as ‘Rock’, ‘Pop‘, Talk’ or ‘News’
• Multiplex Name -
displays the broadcasting area and collection of radio stations on
this frequency e.g.: BBC National DAB, Digital 1 Network.
• Channel and Frequency - e.g.: 12B 225.648 MHz
• Signal error - This is displayed as a number between 0-99. It would not be possible
to satisfactorily listen to a ratio station with a signal error rate of 30 or above. Try
adjusting the aerial or relocating your radio to improve reception.
• Signal information - The data rate at which the signal is being transmitted.
• Time and date - supplied by the broadcaster.
1. Repeatedly press and release the Info button to cycle through the different information
options.
Dynamic range control (DRC)
In DAB mode:
The dynamic range for each radio programme is set by the broadcaster for each radio
station and may be different for the types of programme broadcast, such as pop or
classical music or a chat show. The dynamic range control signal is transmitted in parallel
with the audio signal for each programme and with your radio you can use this control
signal to expand or compress the dynamic range (the difference between the loudest and
quietest sounds) of the reproduced audio signal. Changing the dynamic range can affect
the ‘loudness’ and/or ‘quality of sound’ of the programme that you hear so that it will be
more suited to your listening conditions and your own personal listening requirements.