Page 5
User instructions
Earphone connection
Instructions for earphone usage.
1:
Connect the
3
.
5
mm earphone plug into the
EARPHONE
socket on the bottom of the unit.
To prevent possible hearing damage,
do not listen at high volume levels
for long periods.
In music mode, when the volume is adjusted to
85dB the above icon will appear on the display.
Press the ‘M’ button to continue.
If you hear no sound during playback, do not turn
the volume up as the music may suddenly begin
at a high volume.
Excessive sound pressure from earphones and
headphones can cause hearing loss.
To avoid damaging your ears, adjust the volume to
the lowest safe level before playing, and turn up
to the desired level when playback has started.
Music playback
1:
Select
‘MUSIC’
on the main menu and press
‘M’
to
enter music mode.
2:
To skip through the available tracks on the device
using the
/
buttons.
3:
Press the Play/ Pause button to begin playback of
a selected track. To pause playback press the Play/
Pause button once more.
4:
Press and hold either
/
buttons to fast
forward or rewind the current track during playback.
5:
To adjust the volume levels press the
‘VOL’
button
and then use the
/
buttons to increase or
decrease the level.
Replay mode
Replay mode will allow you to repeat a designated
section of an audio track.
1:
During playback press the
‘M’
button to enter the
audio function menu.
2:
Use the
/
buttons to select
‘Replay Mode’
and
press the
‘M’
button to enter the Replay menu.
3:
Select
‘Replay’
and press the
‘M’
button to begin the
A-B replay settings.
4:
Press the
button to set the
‘A’
marker
(beginning
of the repeat section)
. Press the
button once
more to set the
‘B’
marker
(end of the repeat
section)
.
5:
The selected audio will now repeat for the specified
amount of times
(see point 6)
.
6:
From the Replay menu you can select
’Replay Times’
.
Use the
/
buttons to set the number of
times the replay is to repeat. Press the
‘M’
button to
activate.
7:
From the Replay menu you can choose
‘Replay Gap’
to specify the length of time in-between each
‘replay’
.
Use the
/
buttons to set the gap time. Press
the
‘M’
button to activate.
EQ modes
You can apply various sound EQ’s to audio following the
below steps.
1:
During playback press the
‘M’
button to enter the
audio function menu.
2:
Use the
/
buttons to select
‘Equalizer’
and
press the
‘M’
button to enter the
EQ
menu.
3:
Use the
/
buttons to select one of the
following options:- Natural, Rock, Pop, Classic, Soft,
Jazz & dbb
(dynamic bass boost)
.
4:
Press the
‘M’
button to return back to the music
interface.
Содержание CMP42
Страница 1: ...Instruction Manual CMP42...
