background image

Page 4

Power supply

Mains Power Using the supplied AC adaptor

1:

 Connect the mains adaptor to a 

UK 

mains outlet .

2:

 Connect the adaptor plug into the rear mains socket 

(15)

 .

NOTE: Please ensure you only use the supplied 
mains adaptor with this unit.

3:

 When the power is connected the unit will be in 

STANDBY 

mode . You will need to press the 

STANDBY 

button 

(3)

, or 

(19)

 on the remote to wake up the unit .

4:

 To put the unit into standby mode, press the 

STANDBY 

button 

(3)

 or 

(19)

 .

NOTE: 

This unit is designed to enter 

STANDBY

 

mode automatically after 

20 MINUTES

 of inactivity . 

Press the 

STANDBY

 button to wake the unit .

Setting the clock

1:

 Ensure the unit is in 

STANDBY 

mode by pressing the 

STANDBY 

button . If you see only 

‘0:00’

 then you are in 

the correct mode .

NOTE: If the time has been set previously the 
display will not show 

‘0:00’ but the time from the 

original setting.

2:

 Press and hold the 

CLK SET 

button 

(5)

, or 

(34)

 on the 

remote to enter the clock setting menu .

0:00

3:

 Set the hour digits by pressing either of the  

 / 

 

buttons 

(12

,

13/22)

 . Once the hour has been set press 

the 

CLK SET 

button again to move onto the minute 

setting . Use the same process to set the minutes .

4:

 When set press the 

CLK SET 

button once more to 

store the setting .

NOTE: the clock is set in 24hr mode only.

Setting the alarms

This unit is equipped with two independent alarms.

The following steps will assume the clock has been

set already and the unit is in STANDBY mode.

Setting Alarm 1/ 2 from the remote control

1:

 Press and hold the 

ALARM 1

 or 

ALARM 2

 button 

(23

,

30)

 to initiate the alarm setting function . You will 

see the corresponding alarm icon appear on the 
display and the hour digit will flash .

2:

 Set the hour digits by pressing either of the 

 / 

 buttons 

(12

,

13/22)

 . Once the hour has been set 

press the 

ALARM 1

 or 

2

 button again to move onto 

the minute setting . Use the same process to set the 
minutes . Press the 

ALARM 1

 or 

2

 button once more to 

complete the time setting .

0:00

AL1

3:

 You will now see 

BU 

appear on the display .  Use the 

 / 

 buttons to select from 

BU (buzzer)

CD 

or 

RAD (radio)

 . The 

CD 

or 

RADIO 

alarm volume level is 

set using the 

/- buttons 

(1

,

2/26)

 . 

AL1

4:

 Press the 

ALARM 1

 or 

2

 button to complete the alarm 

setting .

5:

 To activate or deactivate an alarm press the relevant 

alarm button eg:- 

ALARM 1 

or

 2 (23

,

 30)

 .

NOTE: Pay attention to the alarm icons on the 
display. If the icon is not present the alarm is 
inactive.

6:

 To disable the alarm when sounding press the 

STOP/

AL OFF 

button 

(9)

, or press either 

ALARM 1

 or 

2

 

button .

Snooze function

Should you wish to delay the alarm for 9 minutes you

can activate the SNOOZE function.

1:

 When the alarm sounds press either 

SNOOZE 

button 

(1

,

2

,

31)

 to delay the alarm for 

9

 minutes .

2:

 After one hour of snoozing the 

SNOOZE 

function will 

no longer operate .

User instructions

Содержание CMC1112BT












Отзывы: