Bush CD-212DAB, Инструкция по эксплуатации

Страница: 14 / 25

Using your DAB Radio Boombox
Let’s get started
Using your DAB Radio Boombox
Let’s get started
Using your DAB Radio Boombox
Using your DAB Radio Boombox
26
27
section of these instructions, or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 600 3021 .
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the
Troubleshooting
There are 3 levels of compression:
• DRC off: No compression. This is the default setting.
• DRC low: Medium compression.
• DRC high: Maximum compression.
1. Press and hold the Menu/Info button to enter the menu options. Use the Rotary tune
wheel to move to <DRC>.
2. Press and release the Select button. The current DRC setting will have an ‘*’ next to it.
3. Use Rotary tuning wheel to move through the options and press and release the
Select button to confirm.
4. Press and release the Menu/Info button to exit from the Menu.
FM Radio mode
Check that your Boombox is in FM radio mode. If you are not already in FM mode, briefly
press and release the Power/Mode button, until you are in FM mode (check the display).
When your Boombox is in FM mode it can receive Radio Data System or ‘RDS’ information
if this is being transmitted by the broadcaster. RDS information will often include the
station name, detail about the programme and the current time.
If you were listening to an FM station when you switched the Boombox off then this
station will be automatically selected when you switch the Boombox back on.
Telescopic radio aerial
Please make sure that the telescopic aerial on the back of the Boombox is fully extended
and adjusted before you attempt to tune to an FM radio station (a vertical position is
recommended). This will ensure that the maximum signal strength is available when
the Boombox begins to scan. Extending the aerial also ensures the best possible sound
quality.
Tuning to an FM station
In FM mode:
1. Press and release the Scan/Repeat button to scan up the frequency band. Press and
hold the Scan/Repeat button to scan down the frequency band. Your Boombox will
search for the next available station and then stop on that station.
2. Use the rotary tuning wheel to fine tune each frequency in 0.05MHz steps, if
necessary.
Note: If reception is still poor check that the telescopic aerial is fully extended or try
moving the Boombox to another location.
Changing the scan setting
In FM mode:
1. Press and hold the Menu/Info button to enter the menu options.
‘<Scan setting>’ will be displayed. Press and release the Select button.
There are now two different options to choose from and the current setting will have
an ‘*’ next to it.
• Strong stations
The scan will only stop when a strong signal strength is received which should also
result in a better audio quality. It is possible that the station you are scanning for may
be missed using this option.
• All stations
The scan will stop for every station it receives, even if the signal strength is poor.
2. Use the Rotary tuning wheel to move to and choose from the two options available.
Press and release the Select button to confirm.
3. Press and release the Menu/Info button to exit from the Menu.