Page 7
Bass enhancement
1:
To increase the bass level press the
BASS (B)
+ button
(25)
repeatedly .
MUSIC
BASS
2:
To decrease the bass level press the
BASS (B)
- button
(25)
repeatedly .
NOTE: The BASS levels range from -4 to +4.
Mute function
1:
Pressing the
MUTE
button
(26)
on the remote will
temporarily silence the audio output . You will see
‘MUTE’
flash on the display to indicate the mute
function is active .
MUSIC
BASS
2:
Press the
MUTE
button again to resume the audio
output .
Sleep timer
The unit can be set to enter STANDBY mode after a
period of time.
1:
During playback mode of either
TV
,
COAX
,
OPTICAL
or
AUX
modes, press the
SLEEP
button
(23)
to enter the
timer settings .
2:
Press the
SLEEP
button repeatedly to cycle through
the available time duration options of :-
5
,
10
,
15
,
30
,
45
,
60
,
90
minutes &
OFF .
MUSIC
BASS
3:
When you have selected the required timer duration,
just leave all buttons untouched for
2
seconds and
the timer will begin the countdown .
Sleep timer (cont)
4:
When the timer elapses the
STANDBY
mode will be
activated .
Adjusting the display brightness
1:
Press the
DIM .
button
(24)
repeatedly to cycle through
the
3
brightness states
LOW
,
MED
&
HIGH .
Bluetooth operation
Pairing a Bluetooth device
Before you can use the sound bar with your phone or
other bluetooth capable device you will need to pair
the device to the sound bar.
1:
Press the
SOURCE
button
(5
,
18)
repeatedly until you
see
‘BT’
appear on the display .
MUSIC
BASS
2:
When selected the
‘BT’
text on the display will flash
rapidly after
5
seconds while the unit tries to connect
to previously paired devices . If no devices are found
the
‘BT’
text will still flash but slowly to indicate it is
ready for pairing a new device .
3:
Enable the Bluetooth function on your audio device
and search for a device labelled
‘BUSH CBAR7W’
in
the available list .
4:
Select and enable pairing for the
‘BUSH CBAR7W’
device . If prompted for a password enter
‘0000’
.
5:
If pairing is successful the
CBAR7
W will beep and the
‘BT’
text will stop flashing .
6:
If the connected device goes out of range, the sound
bar will attempt to connect for
2
minutes . When the
device comes into range the sound bar will reconnect
again automatically .
7:
To remove the paired device using only the sound bar,
press and hold the
OPTION
button
(22)
on the remote
control . The
‘BT’
text will begin flashing slowly again .
User instructions