Bush CAB-91667, Инструкция по эксплуатации, Страница: 7 / 14

If the two units were connected and paired before, the two units will connect and pair with each
other automatically.
2. Touch and hold " " button on one of the two units, then touch and hold " " button on
another unit at the same time, the two units will search and pair with each other.
7
BLUETOOTH PAIRING AND CONNECTION
FIRST TIME PAIRING
1. Push the power switch to "ON" position to power on both units, the two units will send a sound,
and the BT/LINE indicator will flash.
3. After successful pairing and connection, a chime will be heard and the BT/LINE indicator on
main unit will flash. (the BT/LINE indicator on deputy unit will stay lit).
NOTE:
Repeat the operation of STEP 2 to switch the main unit before pairing with bluetooth enabled
audio player or mobile phone.
5. After successful connection, the BT/LINE indicator on main unit will stay lit.
6. Play track on bluetooth enabled audio player or mobile phone as usual.
4. Open the bluetooth on bluetooth enabled audio player or mobile phone and try to search and
pair with the main unit, the pairing name "CAB-91667
NOTE:
Before pairing, make sure the LINE IN cable is not plugged into the LINE IN jack.
" will appear, select and make connection.
NOTE:
If the main unit had been switched before connected with the bluetooth enabled audio player
unit again although there is "CAB-91667" listed on pairing name list.
During playing:
A:Touch or button to skip to previous or next track.
B:Touch button to pause, touch again to resume playing.
C:Touch VOL + or VOL - button to increase or decrease the volume.
or mobile phone, the bluetooth enabled audio player or mobile phone must search the main
The A, B, C operation above are simutaneous during playing.
For example, touch VOL + button on one of the two units, the volume on both units will increase.
The unit from which the " " button being touched will be the main unit.
The two units will enter standby mode without any audio output or operation after about 30 minutes.
NOTE:
Holding the button on main unit to cut off connection between main unit and bluetooth
off connection between main unit and the deputy
unit. (To reconnect the deputy unit, please pause playing on main unit, and restart deputy unit.
enabled audio player or mobile phone.
Holding the button on deputy unit to cut
DISCONNECTION:
After reconnection with main unit again, touch VOL - to set to minimum volume, then touch
VOL + to set to the desired volume.)
Please restart two units and make connection again when unsuccessful connnection happen in
some special circumstance.