Bush CAB-91667, Инструкция по эксплуатации, Страница: 5 / 14

1. Mark the position of the mounting screws on the wall using a pencil.
2 pieces plastic inserts
2 pieces screws
1. Mark the position of the mounting screws on the wall using a pencil.
(1 )
(2)
2. Drill 2 x 7/32 inch diameter holes by a powerful electric drill ( Not Supplied ).
2 pieces screws
MOUNTING
5
A. Mounting On The Wooden Wall
B: Mounting On The Brick Wall
A. Mounting On The Wooden Wall
B: Mounting On The Brick Wall
3.Put the two units on the mounting screws. Make sure they are firm and stable.
5.Put the two units on the mounting screws. Make sure they are firm and stable.
2. Drill the screws(not supplied) directly into the marks that you have made on the wall
3. Insert the plastic inserts(not supplied) into the holes by hammer(Not Spplied)
4. Secure the screws into the plastic insert (not supplied) and leave approx. 0.3 inch
and leave approx. 0.3 inch length to hook.
length to hook.