BAS520BT
10
FM Mode
Selecting FM Mode
1. Press
SOURCE
button repeatedly to select FM mode.
2. For initial use, it will start at the beginning of the FM frequency range (87.50MHz). Or it
will play the last FM station you were listening to.
3.
To manually change the FM frequency
, while FM frequency shows up, press
TUNE
button first and then press
or
button to change the frequency by 0.05MHz per
step.
4.
To automatically scan
, while FM frequency shows up, press
TUNE
button first and then
press and hold
or
button, your unit will skip backwards or forwards until it
reached the next available station.
Scan Setting
By default, FM scans stop at any available station. This may result in a poor signal-to-noise
ratio (hiss) from weak stations.
1.
To change the scan settings to stop only at stations with good signal strength, press
MENU
button and then press
or
button to select
Scan setting
, press
SELECT
button to confirm.
2.
Press
or
button
to browse
‘
Strong stations only
’
, and then press
SELECT
button to confirm.
Audio Setting
By default, all stereo stations are reproduced in stereo. For weak stations, this may result in a
poor signal-to-noise ratio (hiss).
1.
To play weak stations in mono, press
MENU
button and then press
or
button to select
Audio setting
, press
SELECT
button to confirm.
2.
Press
or
button
to browse
‘
Forced mono
’
, and then press
SELECT
button to
confirm.
