Bush 8914332, Инструкция по эксплуатации

Страница: 44 / 52

Stand Installation & Wall Mounting
Assembling / Removing the stand
Preparations
Take out the stand(s) and the TV from the packing case
and put the TV onto a work table with the screen panel
down on a clean and soft cloth (blanket, etc.)
• Use a flat and firm table bigger than the TV.
• Do not hold the screen panel part.
• Make sure not to scratch or break the TV.
Assembling the stand
1. Place the stand(s) on the stand mounting pattern(s) on the rear
side of the TV.
1
2.
Insert the screws provided and tighten them gently until the
stand is properly fitted.
Removing the stand from the TV
Be sure to remove the stand in the following way when
using the a wall mount bracket or repacking the TV.
• Put the TV onto a work table with the screen panel down
on a clean and soft cloth. Leave the stand(s) protruding
over the edge of the surface.
• Unscrew the screws that fix the stand(s).
• Remove the stand(s).
When using the wall mount bracket
Your TV is also prepared for a VESA-compliant wall mount
bracket. If it is not supplied with your TV, contact your
local dealer to purchase the recommended wall mount
bracket.
Holes and measurements for wall mount bracket
installation;
W
H
VESA WALL MOUNT MEASUREMENTS
Hole Pattern
Sizes (mm)
W H
400 200
Screw Sizes
Length (X)
min. (mm) 10
max. (mm)
13
Thread (Y) M6
Other information
Helpful technical information
Other information 42
If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the Help Menu ,
or online at
www.bush-support.co.uk.
If you still require further assistance, call one of our experts on
0345 604 0105, a Bush enquiry line.
BUSH
I
firetv
'
�,