Bush 8914332, Инструкция по эксплуатации

Страница: 17 / 52

Other Connections
If you want to connect a device to the TV, make sure that both the TV and the device are turned off before
making any connection. After the connection is done, you can turn on the units and use them.
Connector Type Cables Device
HDMI
Connection
(back&side)
VGA
Connection
(back)
VGA Audio
Connection
(back)
VGA Audio Cable
SPDIF
(Optical
Out)
Connection
(back)
Composite
(Audio/Video)
Connection
(back)
Audio Video Cable
Headphone
Connection
(side)
USB
Connection
(side)
CI
Connection
(side)
CAM
module
Ethernet
Connection
(back) LAN / Ethernet Cable
To enable VGA audio, you will need
to use the back audio inputs
with a VGA audio cable for audio
connection. When using the
wall mounting kit (contact your
dealer to purchase one, if not
supplied), we recommend that
you plug all your cables into the
back of the TV before mounting
on the wall. Insert or remove the
CI module only when the TV is
SWITCHED OFF. You should refer
to the module instruction manual
for details of the settings. The
USB inputs on the TV support
devices up to 500mA. Connecting
devices that have current value
above 500mA may damage your
TV. When connecting equipment
using a HDMI cable to your TV,
to guarantee sufficient immunity
against parasitic frequency
r a d i a t i o n a n d t ro u b l e - f re e
transmission of high definition
signals, such as 4K content, you
have to use a high speed shielded
(high grade) HDMI cable with
ferrites.
Connections
Bringing it all together
Connections 15
If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the
Help Menu
,
or online at www.bush-support.co.uk. If you still require further assistance, call one of our experts on 0345 604 0105, a Bush enquiry line.
BUSH
I
firetv
'
�,