Bush Hog HT419H, Руководство оператора

Страница: 47 / 84

ASSEMBLY
HT419H 05/22 Assembly Section 3-19
© 2022 Alamo Group Inc.
ASSEMBL
Y
Now, sending oil from the tractor hydraulic circuit, raise the side rotors 1. the correct transport position (or
maneuvering position when in the field) is when tine 2 at the front of the machine and tine 3 at the back are
approximately the same distance from the ground.
NOTE: For reasons of stability, the weight of the machine with regard to wheel axle A must always be
unbalanced with more weight at the front, to avoid having the machine tip backwards when it is detached from
the tractor due to it being heavier at the back. Therefore it must be unbalanced toward the front even if tine 2 is
slightly closer to the ground than tine 3.
When the correct transport position is reached, bring bushing 4 into contact with the front face of cylinder 7,
bring nut 5 into contact with bushing 4 and tighten them together. With this adjustment the machine is ready for
working and transport.