Bush Hog DHP10, Руководство оператора

Страница: 26 / 68

ASSEMBLY
DHP8, DHP10, DHP12 05/21 Assembly Section 3-2
© 2021 Alamo Group Inc.
A
SS
EM
B
LY
DEALER SET-UP INSTRUCTIONS
The Bush Hog DHP8, DHP10 and the DHP12 pull-type discs are perfectly matched for agricultural utility tractor
having 45 to 80 drawbar horsepower. They have applications in seed bed preparation, soil pulverization, and
tillage on smaller farms, ranches, construction sites, race tracks, rodeo grounds, nurseries, reclamation sites,
and sod farms. Economy conscious customers will find them more than equal to just about any soil cultivation
task you can throw at them. With notched or smooth 20” or 22” discs mounted on front and rear gangs that
have easily adjustable angling, the DHP8, DHP10 and DHP12 readily adapt to a wide range of tillage
conditions.
Always use personal protection devices such as eye and ear protectors during assembly.
AXLE ASSEMBLY
1. Unpack Disc Harrow from shipping crate.
2. Secure axle assembly (3) to frame with 3 axle
clamps (1).
3. Fasten axle clamps with 1/2”x2” HHCS and 1/2”
nylock nuts (2). Asm-D-0004
SPINDLE/HUB/WHEEL ASSEMBLY
1. Unpack Disc Harrow from shipping crate.
2. Support main frame with a suitable lifting
device,
3. Verify fit-up of spindle/hub (2) to support tube
(3) by assembling the two together without anti-
seize lubricant.
4. Remove spindle from support tube and apply a
thin coat of anti-seize lubricant.
5. Insert spindle (2) into support tube (3) and
secure with two 1/2”-13x3-1/4” GR5 capscrews
(5) and 1/2” locknuts (6). Tighten to the correct
torque.
6. Mount wheel (1) to hub with five 1/2”-20lug nuts
(4). Tighten lug nuts too the correct torque.
7. Repeat steps 2 - 6 for the opposite side. Asm-
D-0005