Bush Hog DHP10, Руководство оператора

Страница: 12 / 68

SAFETY
DHP8, DHP10, DHP12 05/21 Safety Section 1-8
SA
FE
TY
© 2021 Alamo Group Inc.
Ensure any remote starting system is inoperative before servicing or cleaning the machine.
Inadvertent engine start up could result in entanglement or runover causing serious injuries
or death.
(SSB-17)
Use extreme care when climbing onto the Equipment to perform repairs, maintenance, and
cleaning. Use proper stands and ladders to access areas that cannot be reached from
ground level. Slipping and falling off the Equipment can cause serious injury or death.
(SSB-
25)
Never work under the Implement, the framework, or any lifted
component unless the Implement is securely supported or blocked up
to prevent sudden or inadvertent falling which could cause serious
injury or even death.
(SG-14)
Never attempt to lubricate, adjust, or remove material from the Implement while it is in
motion or while tractor engine is running.
(SG-20)
Periodically inspect all moving parts for wear and replace when
necessary with authorized service parts. Look for loose fasteners, worn
or broken parts, and leaky or loose fittings. Make sure all pins have
cotter pins and washers. Serious injury may occur from not maintaining
this machine in good working order.
(SG-21)
Perform service, repairs and lubrication according to the maintenance section. Ensure the
unit is properly lubricated as specified in the lubrication schedule and all bolts and nuts are
properly torqued. Failure to properly service, repair and maintain this Implement in good
operating condition could cause component failure and possible serious injury or even
death.
(SG-35)
Use caution and wear protective gloves when handling sharp objects such as blades,
knives, and other cutting edges. Be alert to worn component surfaces which have sharp
edges. Sharp surfaces can inflict severe laceration injuries if proper hand protection is not
worn.
(SG-37)
Exercise care when handling the discs. Disc blades are SHARP and HEAVY. Wear gloves
at all time to protect your hands.
(STL-10)
Do not use your hands or feet to clean the disc gangs. The discs are sharp and serious
injures could result from inadvertent contact with the discs. Never attempt to stand on the
discs, tires, or frame members of the implement.
(STL-11)