Bush Classic WO268, Инструкция по эксплуатации

Страница: 30 / 48

Using your Stereo DAB/FM Radio
Let’s get started
Using your Stereo DAB/FM Radio
30
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the
Troubleshooting
Setting the alarm
Note: Check that the radio has the correct time and date before you set an alarm.
In DAB or FM mode:
1. Press and hold the Menu/Info button to enter the menu options..
2.
Use the Tune/Select rotary control to scroll to ‘<System>’. Press the Tune/Select rotary
control to select.
3. Use the Tune/Select rotary control to scroll to ‘<Alarm>’. Press the Tune/Select rotary
control to select.
4.
‘Alarm 1 Setup’ is displayed. Use the Tune/Select rotary control to change ‘Alarm 2
Setup’ as required. Press the Tune/Select rotary control to select.
5. ‘Alarm 1 (or 2) Wizard On time’ is displayed and the hour digits for the alarm will flash.
6. Use the Tune/Select rotary control to scroll to the hour for the alarm and press the
Tune/Select rotary control to select.
7. The minutes will now flash. Use the Tune/Select rotary control to scroll to the minutes
for the alarm and press the Tune/Select rotary control to select. The duration time will
now flash.
8. Use the Tune/Select rotary control to scroll to the duration for the alarm. You can
choose from 15, 30, 45, 60, 90 and 120 minutes. Press the Tune/Select rotary control
to select. The source for the alarm will now flash.
9.
Use the Tune/Select rotary control to scroll to the sound source for the alarm. You
can choose from Buzzer, DAB or FM. Press the Tune/Select rotary control to select.
Note: If you select DAB or FM radio for the alarm source, ‘Last listened’ will flash in the
display. Press the Tune/Select rotary control to select and the last listened to radio
station in DAB or FM, as appropriate, will be used for your alarm.
10. Use the Tune/Select rotary control to scroll to the frequency for the alarm. You can
choose from Daily, Once, Weekends or Weekdays. Press the Tune/Select rotary
control to select.