Bush Classic WO268, Инструкция по эксплуатации

Страница: 26 / 48

Using your Stereo DAB/FM Radio
Let’s get started
Using your Stereo DAB/FM Radio
26
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the
Troubleshooting
quietest sounds) of the reproduced audio signal. Changing the dynamic range can affect
the ‘loudness’ and/or ‘quality of sound’ of the programme that you hear so that it will be
more suited to your listening conditions and your own personal listening requirements.
e.g. in a noisy environment, where quiet sounds might be swamped, setting the
compression to maximum will ‘boost’ the quiet sounds, whilst keeping the loudest sounds
at their original level.
There are 3 levels of compression:
• DRC Off: no compression. This is the default setting.
• DRC Low: medium compression.
• DRC High: maximum compression.
1. Press and hold the Menu/Info button until the display changes to ‘DAB <Full scan>’.
2.
Use the Tune/Select rotary control to scroll to ‘DRC’ and press to select. The current
DRC setting will have an ‘*’ in the top right of the display.
3. Use the Tune/Select rotary control to scroll through the 3 compression level options
available and press the rotary control to select. Press and release the Menu/Info
button to return to the station display.
FM Radio mode
If you are not already in FM mode, briefly press and release the Mode button to go to FM
mode (check the display). If you were listening to an FM station when you switched the
Radio off then this station will be automatically selected when you switch the Radio back
on.
Telescopic aerial
Please make sure that the aerial is fully extended before you attempt to tune to an FM
station. This will ensure that the maximum signal strength is available when the radio
begins to scan. Extending the aerial also ensures the best possible sound quality.