Buschmann tools DOUBLE FALZ SEAMER, Быстрый старт

Страница: 3 / 8

DOUBLE FALZ SEAMER SETUP
1
2
3
/
4
Position the cordless drill machine on the
10mm rotating hex cap head axle and tighten
it.
Tighten the cordless drill inside the Holder
with the key that comes with the the tool.
The holder must be tightened until the inside
edges of the holder stops against the cordless
drill machine.
Adjust support bar which connects cordless
drill mounting to Double Falz Seamer machine
When setting up the DOUBLE FALZ SEAMER
we must remove and make sure that
cordless drill accumulator is removed
from the Accumulator drill machine
Only when we are definitely sure that everything is con -
nected properly only then we place the battery inside the
cordless drill machine and start working!
4
3
1
2
FOR ROOF
DOUBLE STEP
The beginning of
the metal profile
is in line with the
middle of third
roll marker
Position the DOUBLE FALZ SEAMER
so that 3rd roll is in line with the
Pull the handle upwards, so rolls lock in
their position and start seaming!
Using without twin square seam folder
• For metal profile thickness of 0.4 - 0.6 mm you must use a
spacer of 4 mm
• For metal profile thickness of 0.6 - 0.8 mm you must use a
spacer of 5 mm
UNSCREW THE THIRD ROLL AND CHANGE THE SPACERS DEPENDING
ON THE METAL PROFILE THICKNESS
3