BUSCH PLUS Master Control, Инструкция по эксплуатации

Страница: 10 / 44

5 | Installation and Commissioning
10 / 44 Instruction Manual PLUS Master Control R5 PLUS_EN_en
2
¼
2x
3
1
1 2 3 4 5 6 7 8
Power supply
1~ 110/230V 50/60Hz
or 24V DC
Quarter turn key
(delivered loose)
Remove central
front cover
LAN Port
Ethernet Switch*
*not included in the scope of delivery of the vacuum pumps
Ethernet cable*
Cable gland
• Refer to the chapter “Ethernet Settings” in the specific document “Pump Control In-
structions, art.0870213261” to set the ethernet parameters in the control interface of
each PLUS vacuum unit.
• A different IP address must be set for each vacuum unit.
192.168.0.22 192.168.0.23 192.168.0.27 192.168.0.24
HOME
SETTINGS
OPERATIONS
CONTACT
MAINTENANCE
SYSTEM
MODEL ETHERNET
Off
Ethernet settings
Current IP address
192 . 168 . 0 . 22 0 . 0 . 0 . 0
New IP address
Change settings
0 . 0 . 0 . 0
New subnet mask Current subnet mask
0 . 0 . 0 . 0
New gateway Current gateway
255 . 255 . 255 . 0
192 . 168 . 0 . 1
/!\ For a modification of the IP address,
an active Ethernet connection is necessary.