BUSCH COBRA NS 0070-0600 C, Инструкция по эксплуатации

Страница: 12 / 40

5 | Installation
12 / 40 0870219588_NS0600C_WCV_Ex_-0000_IM_en
5 Installation
5.1 Installation Conditions
WARNING
The installation conditions are not respected in an ATEX environment.
Risk of severe injury!
Risk of explosion!
• Take care that the installation conditions are met.
NOTICE
Use of the machine outside of the permitted installation conditions.
Risk of premature failure!
Loss of efficiency!
• Take care that the installation conditions are fully complied with.
• Make sure that the environment of the machine complies with the ATEX classification
of the machine according to the data given on the nameplate of the machine (NP).
• Make sure that the ambient conditions comply with the
Technical Data [ ► 36]
.
• Make sure that the environmental conditions comply with the protection class of the
motor and the electrical instruments.
• Make sure that the installation space or location is vented such that sufficient cooling
of the machine is provided.
• Make sure that the oil sight glass (OSG) remains easily visible.
• Make sure that enough space remains for maintenance work.
• Make sure that the machine is placed or mounted horizontally, a maximum of 1° in
any direction is acceptable.
• Check the oil level, see
Oil Level Inspection [ ► 27]
.
• Check the cooling liquid level, see Cooling Liquid Level Inspection [ ► 27] .
• Make sure that the cooling water complies with the requirements, see Cooling Water
Connection [ ► 14] .
If the machine is installed at an altitude greater than 1000 meters above sea level:
• Contact your Busch representative, the motor should be derated or the ambient
temperature limited.
If additional electrical components not included in scope of delivery should be added:
• Make sure that they have a better or equal ATEX classification than that of the
machine, see the ATEX marking on the nameplate (NP).
• Make sure that the installation space or location is ventilated enough in orderto pre-
vent the formation of an explosive area.