Commissioning
Product manual 2CKA001473B9190
│24
6.3.1
Parameter settings of room temperature controller
Calibration process during initial commissioning
Notice
At initial commissioning and connection to the system the device should not be
used for at least 3 hours.
At initial commissioning and connection to the system the
device should not be used for at least 3 hours.
The heating control/switching channel should remain
deactivated during this period. After this the calibration
process starts automatically since the device has
adjusted itself to the ambient temperature.
Before this period expires, the following message is
displayed under "Notifications":
The device is not calibrated. The calibration starts
automatically after a rest period of 3 hours.
Fig. 17: Calibration process during initial
commissioning