background image

27

Display

This menu point makes it possible for you to adjust the display in a range of different ways. 

In order to avoid the blinding effect especially when driving at night, you can activate the Sleep mode. 
This causes the display to shut off after either 15, 30 or 60 seconds. With an incoming call, the HFCK 
activates the display automatically. 

In the Illumination menu item you can change the intensity of the light diodes in the display. 

To be able to read the contents of the display optimally during different light conditions, in the next 
menu item, Day/Night mode, you are able to invert the display.

In the Colour theme menu item you can adapt the background colour of the display to the colour 
schemes of the display in your vehicle. Several different possibilities are available.

This product was produced in compliance with the strictest quality criteria. Still in the course of time it 
can occur that the calibration of the display changes (e.g. if touch screen commands are no longer 
carried out correctly). Then you have the possibility of newly calibrating the display. If you select the 
Calibration menu, then you will firstly be asked a security question, and a cross will then appear on 
the display which you should touch. Please repeat this procedure 4x, then the HFCK is newly calibrated 
and jumps back to the head menu. Please only carry out this process when the vehicle is standing 
still. 

Device

In this menu item, you can make the settings concerning the answering of calls, the menu langu-
ages
, the phone book options, for the system itself, and for the on-call duty.

With the Call answering function you can specify as to whether you want to answer an incoming call 
manually via the touchscreen or automatically. If you select automatic call answering, the call will be 
answered automatically after two rings. You can then decide whether to accept or decline the call.

You have to set the language when you use the device for the first time and after updating the firm-
ware or loading factory settings. Select the Language of your choice from the list.
 

Содержание CC 9056





































Отзывы: