35
Operating guidelines
8. Switch-on
When providing the hands-free car-kit (HFCK) with power, a long signal
is audible. The HFCK tries to establish a connection for 90 seconds
(depending on the number of connected telephones) to the last con-
nected mobile telephone within reach.
9. Establishing a
Bluetooth
®
connection
If you wish to establish a
Bluetooth
®
connection for the first time, you
have to activate the
Bluetooth
®
function of your mobile phone and
search for
Bluetooth
®
devices. In this case search for a device labelled
„comf_comp V...”. If several devices were identified, please select the
HFCK and enter the PIN number 1234. The
Bluetooth
®
connection (pai-
ring) will then be established between your mobile phone and the
HFCK.
If a connection has been set up, a message appears in the display of
the mobile phone. If it is not possible to establish a connection, please
check and update the software release of your mobile phone or of the
HFCK. An overview dealing with this subject can be found on the Inter-
net at www.bury.com. If you have questions with regard to the menu
navigation, functions and operation of your mobile phone, please refer
to the operating guidelines of your mobile phone. Depending on the
manufacturer and type, this considerably differs from each other.
The HFCK has a memory for the storage of the identification of up to 6
mobile telephones. When the next mobile phone is connected, the
oldest entry in the HFCK memory is deleted respectively.
If you wish to cancel a
Bluetooth
®
connection, you can either discon-
nect it conveniently at the HFCK or at your mobile phone. In addition,
the connection is disconnected, if you move too far away from the ve-
hicle while taking your mobile phone with you and thus leave the recep-
tion radius of the HFCK.
Please note:
If you disconnect the power supply of a Plug & Play hands-
free car kit by unplugging the cigarette lighter jack or the fixed
installation device, an active
Bluetooth
®
connection is also dis-
connected.
