14
15
8. Initial operation of the hands free set
After power supply of the hands free Kit (HFK) is sucessful connected,
the HFK is activated when you have started the vehicle. After that you
have to select the user language.
You can change the user language by selecting the entry lanuage.
You will find the entry under
more
-
head menue
-
settings
-
de-
vice
-
language
(see chapter 22.5).
9. Establishing a Bluetooth
®
connection
If you would like to establish a Bluetooth
®
connection for the first time,
you must activate the Bluetooth
®
function in your mobile telephone and
start the search for Bluetooth
®
devices. Serach for a device with the
description “CC 9060...“. If several devices have been found, please
select and connected the 9060 and enter the
PIN number `1234´.
Up
to ten Bluetooth
®
devices recognitions can be stored in the system.
Note:
If the automatic connection is activated, no other mobile
telephone can be paired. If you want to pair a new tele-
phone, the automatic connection must be deactivated by
pressing the Auto connect field (upper right).
With the operation field on the left, you have the possibility of de-
ciding between the day or night mode (also see chapter: display).
In case a mobile telephone has been connected at some time, the
recognition / names of the mobile telephones appear in the display.
These are read one after the other by the HFK. With a connection
which has successfully been made, the name of the coupled mobile
telephone and of the provider will be shown and the data from the
telephone book (SIM card) and the address book (storage of the
telephone) are transmitted to the HFK. Depending on the amount of
stored data, this can take a few seconds. If the synchronisation of
the phone book is interrupted, e.g. though an incoming call, it is
possible that all entries will not be transmitted. If this happens, the
phone book should once again be manually synchronised (see chap-
ter: device).
Startscreen with
paired telephone
Startscreen without
paired telephone
Operating guidelines
10. Handling possibilities
The system can be operated in two ways:
1. Operation using voice control
2. Handling via Touch screen
Touch screen
VOICE DIAL
COMMANDS
Missed calls/
New messages
Device connected
Active Bluetooth
®
connection
Volume
Signal strength of the mobile
telephone network
The loading status
of the battery of the
mobile telephone
Mobile telephone
in the A2DP mode
Dial number
Activate Voice dial
Phonebook
More functions
Note:
The telephone book on your mobile phone is generally
synchronised by the hands-free car kit at regular intervals.
For the duration of this short moment, the voice control will
not be available to you and you will receive a corresponding
message.
11. The display
Note:
Please be sure to clean the display as necessary using a
damp lint free cloth. Please do not use any detergent.
