12
R
5 MAINTENANCE
The Elcometer 7410 Concrete Moisture Meter is
designed to give many years reliable service
under normal operating and storage conditions.
Regular calibration checks over the life of the
Elcometer 7410 Concrete Moisture Meter are a
requirement of quality management procedures
e.g. ISO 9000 and other standards.
Follow the instructions given on the optional
calibration check plate (see “Accessories” on
page 13) to confirm whether your gauge is
calibrated correctly.
If your gauge does not meet calibration
tolerances, contact Elcometer or your local
Elcometer supplier.
The instrument does not contain any user-
serviceable components. In the unlikely event of
a fault, the instrument should be returned to your
local Elcometer supplier or direct to Elcometer.
The warranty will be invalidated if the instrument
has been opened.
Details of Elcometer offices around the world are
given on the outside cover of these operating
instructions. Alternatively visit the Elcometer
website, www.elcometer.com
7410_TMA_0354_Issue_03.fm(19520).fm Page 12 Friday, June 5, 2009 3:08 PM
7410
Concrete Moisture Meter
14 of 17
For more information
/ 1300 287 935
[email protected] / www.burwell.com.au
