Burster RESISTOMAT 2408, Руководство пользователя

Страница: 25 / 90

Model 2408
RESISTOMAT
®
Page 25
Table 1-1: Front Panel Controls and Indicators (Continued)
Reference
Number
Figure 1-1
Name Type Function
5 MENU Green Push Button
Press to enter menu display mode or press
to exit sub menu & return to main menu.
6 CNCL Gray Push Button
To exit menu mode with no parameter
changes made or to exit current field
7 ENTER Gray Push Button
To switch user to entry mode or to accept
menu entry as entered.
8 START Green Push Button To initiate the measurement
9 POWER Black Toggle Switch
To apply power to the instrument:
1 = ON, 0 = OFF
10 USB USB connection
To store test setup conditions and measure-
ment results on a flash drive.
11 STOP Red Push Button
To stop the measurement (terminate high
voltage at the output terminals)
12 TEST
Indicate P/F Measurement Result based on
preset limit
12a FAIL Red LED
When lit in Resistance Mode, the measured
value is below the set minimum value (resis-
tance limit).
When lit in Current Mode, the measured
value is above the set maximum value
(current limit).
12b PASS Green LED
When lit, in Resistance Mode, the mea-
sured value is above the set minimum value
(resistance limit).
When lit in Current Mode, the measured
value is below the set maximum value
(current limit).
13 Caution High Voltage Red LED
When lit, indicates presence of High Voltage
at the output terminals.