Page 19
Torque Sensor
Model 8627, 8628, 8632
10. Disposal
Please fulfill your legal obligations and dispose of unserviceable equipment in
accordance with applicable legal requirements. Thus you contribute to envi-
ronmental protection.
11. Calibration
At the time of delivery, torque sensors have been adjusted and tested with trace-
able calibrated measuring equipment at factory side. Optionally, a calibration
of the sensors can be carried out.
11.1 Proprietary Calibration
Acquisition of measurement points and issuing of a calibration protocol trace-
able calibrated measuring equipment is being used for the calibration. The
sensor data are being checked during this calibration.
11.2 DKD/DAkkS Calibration
The calibration of the sensor is carried out according to the guidelines of the
DKD/DAkkS. The surveillance of the calibrating-laboratory takes place by the
DKD/DAkkS. At this calibration, the uncertainly of measurement of the torque
sensors is determined. Further information can be obtained burster praezi-
sionsmessgeräte gmbh & co kg.
11.3 RE-Calibration
The re-calibration of the torque sensor should be carried out after 26 months.
at the latest.
Shorter intervals are appropriate:
►
overload of the sensor,
►
after repair,
►
after inappropriate handling,
►
demand of high-quality standards,
►
special traceability requirements.