Page 20
To set the address off an IEEE488 decade (IEC addr):
If the decade is equipped with an optional IEEE488 Interface, you may set the IEEE488 address of
instruments instead of the “Baud rate”.
The address range is “0” to “30”.
5.2.7 Lightning
Using this parameter you may enable or disable the display lightning.
The decade disables the display lightning after a set time, if no key is pressed.
To set a time:
Press the “MENU” key at standard mode.
Select the parameter “Lightning” with the cursor keys
▲ and ▼.
Use the keys
◄ and ►to s
elect the time to disable the display lightning.
These settings are available:
o
“OFF” (The lightning is disabled)
o
“30 s” (The lightning is disabled 30 seconds after the last hit of a key.)
o
“5 m” (The lightning is disabled 5 minutes after the last hit of a key.)
o
“ON” (The lightning is enabled at all time)
The setting is displayed at the lower row.
Confirm new setting.
To do that, press the “ENT” key.
After pressing the “ENT” key the new setting is written to the upper row.
At this moment the setup of the display lightning is finished.
Содержание 1427
Страница 4: ...Page 4...