Burro Max ES350 BURROeSCOOTER, Руководство пользователя

Страница: 17 / 32

15
Repair and Maintenance
3
Remove the fuse and replace with a new one of equal amperage.
Requires 30 amp fuse. Close the fuse cover and reattach the battery
cover.
Amperage
number
2-Stage Safety Speed Limiter
To switch from slow speed to regular speed, or vice-versa, follow
the steps below.
1. Open the battery cover case by removing the knob screws on
the front and back of the case and then carefully removing the
right side of the battery case. The TT 250 can be set without
removing the cover and accessed through the hole shown below.
A small rocker type switch is inside—position the small
screwdriver at an angle in the access hole to move it from one
position to the next.
2. Move the switch to your desired position. “O” for regular speed
and “I“ for slow speed. (TT 250 uses a push button selector
located as shown removal of the cover is not required)
3. Replace the battery cover case.
The XS 250 will have a max speed of approx 12mph
The TT 250 and ES 350 will have a top speed of approx 14 mph.
TT250
Note: All vehicles
are shipped with
the speed limited in
the Slow Position!
XS250