4
OPERATION (HOTPLATE)
1.
Turn power switch (rear of instrument) to on position.
2.
Set temperature by turning the dial on the right.
3.
Set temperature will appear on bottom of display, with actual surface temperature
appearing on top of display.
4.
Once desired temperature is set, press selection knob to begin heating. The actual
temperature (top of display) will rise to match the temperature set on the bottom. Hot
surface indicator lights at 50°C.
CAUTION: HOT SURFACE
Once selection knob has been pressed, the surface of the instrument will begin to heat. Avoid
bodily contact or personal injury may occur.
CONTROL PANEL
A)
Hot surface indicator (Hotplate only)
B)
Digital Display
C)
Temp. control dial
D)
Start/Stop
Should any damage occur in shipment, do not operate and please notify us at:
800-732-8484 or [email protected].