BURR KING MFG. CO., INC.
1220 TAMARA LANE
WARSAW MO 65355
WWW.BURRKING.COM
(660) 438-8998
(800) 621-2748
FAX (660) 438-8991
Operating instructions for the Model 960-272 belt grinder
Over view:
The model 960-272 belt grinder is a two-wheel belt grinder that uses a 2 x 72-inch (50.8mm x 1.82m) continuous loop
abrasive belt. For maximum efficiency and your safety we recommend you read and understand all operating instructions, manuals,
labels, and other information provided with the equipment.
Various model 960-272 versions are available including models with fixed and variable abrasive belt speed, and various horse
power options and models with 8 or 10 inch contact wheels (203mm and 254mm contact wheels). Several accessories are also
available including small diameter contact wheels, combination platen and small contact wheel assemblies, full abrasive belt guards,
dust collection apparatus, and other contact wheel options. Your Burr King distributor will assist you in selecting value adding options
and accessories to meet your needs.
Receipt and initial machine set-up
1. Insure that you have received all of the items that you ordered. Compare the packing slip with your purchase order, and of course
with the physical items received.
2. Verify that there is no obvious shipping damage. If shipping damage is discovered notify the freight carrier of your intention to file
a freight damage claim. They will assist you.
3. Verify that the AC power that is identified on the machine as received matches the AC power that you intend to operate the
machine with. Do not modify the machine’s wiring without first contacting your distributor or Burr King Manufacturing.
4. Do not modify or defeat any electrical wiring safety feature. For example, do not remove the grounding pin on the AC electrical
plug.
5. Verify that you have received a warranty card, parts lists, catalog, and
Operator, and Operating Area Safety Instructions.
6. Complete the warranty card and return it to Burr King Manufacturing via FAX or mail.
7. Verify that the safety guards for the machine are in place and functional. See the parts list and schematic for the below indicated
part numbers.
a.
The contact wheel guard (903K or 913) and backup platen (964-01) are mounted and adjusted such that the platen lightly touches
the back of the abrasive belt.
b.
The rear idler wheel guard (912) is mounted.
8. Prior to operating the model 960-272 read the
Operator, and Operating Area Safety Instructions
carefully. Insure that all
persons who will operate the machine or who will work in the vicinity of the machine read, understand, and comply with these safety
instructions.
9. Insure that the grinder is located in an area that provides operators with clear and unobstructed access to the machine. The work
place should be free from floor obstructions, trip points, and other faults that could reduce operator safety.
10. Bolt the machine to a structurally sound surface or pedestal. If a pedestal is used bolt the pedestal securely to the floor.
11. Insure that your AC electrical power source is properly sized and properly fused for the machine you purchased. Consult with a
competent electrician to determine the proper specifications for your electrical service prior to connecting your model 960-272 belt
grinder.
