BURR KING 25100, Инструкция по эксплуатации

Страница: 12 / 20

See our catalog at
www.burrking.com
Contact us at
info@burrking.com
M254585opinst NEW 2009.doc - 12/30/2009
9
Maintenance of your Burr King vibratory chamber
Maintenance consists of cleaning the unit, assuring mechanical fasteners are secure, assuring the drive belt is properly
tensioned, and occasionally lubricating the drive shaft bearings.
After initial 24 Hrs of Operation
•
Adjust Drive Belt Tension – ½” Deflection at 2-3 lbs
•
Inspect For Loose Hardware
Every 30 Days of Operation
•
Adjust Drive Belt Tension – ½” Deflection at 2-3 lbs
•
Lubricate Bearings – NLGI#2 Lithium or Lithium Complex, Caution – Do not use excessive grease.
•
Torque Bearing Mounts – 40-50 ft-lbs
•
Torque Motor Mounts – 130-140 in-ozs
•
Torque Bearing Shafts Sets – 65-70 in-ozs
•
Torque Tub Mounts – 240-280 in-ozs
•
Inspect For Loose Hardware
•
Clean as Required
NOTE: Instructions for maintenance are also printed on the maintenance label affixed to the front access panel of
the machine.
Special note about the motor mount and drive belt(s)
Do not over tighten the drive belt. The machine will run better with a drive belt that in another application would appear
to be running too loose.
Over tightening the drive belt will result in premature motor failure.
Warranty service and replacement parts
Should you require warranty service, or replacement parts, please contact your Burr King distributor. The Burr King
factory may be reached at 1-660-438-8998. The motor manufacturer warrants the main drive electric motor; to obtain
motor warranty service contact the motor manufacturer’s service center in your area.
NOTE: when inquiring about
warranty service or replacement parts please be prepared to provide the actual machine part number, and its
serial number.
Modifications to your vibratory chamber
CAUTION: Modification of the machine from its as shipped condition from the factory may create a safety
hazard, and may void the factory warranty. If you have any questions in this regard please consult the factory
before making any modifications.