23
TECHNICAL PASSPORT. INSTALLATION and OPERATION MANUAL
TECHNICAL PASSPORT. INSTALLATION and OPERATION MANUAL
- remove gently upper protective door.
4
2.
Gently pull out lower barrier rib
(2)
which is on top of middle water rib.
3.
Gently pull out upper barrier rib
(3)
which is on top of upper water rib
(4)
4.
For assembling the barrier ribs back
into boiler follow the steps in reverse
order.
Caution! When mounting the
upper resistance rib (3) bend
pointing upwards!
Scrape the inside of flue pipes if necessary.
Use the scraper tool.
It is mandatory to clean once a week
additional barrier ribs into combustion
chamber.
Disassemble the barrier ribs.
Follow described above instructions for
assembly and disassembly.
Clean barrier ribs.
Clean the accumulated ash from heat
exchanging ribs.
Caution! Ashes may contain
smoldering charcoal. Dispose
of ashes only in specially
designated facilities. Disposing
of ashes into public garbage
containers may cause fire.
9.1.1. Preparing for the new heating
season.
Recommended
boiler
maintenance procedures:
1.
Remove internal safety gates inside the
boiler firebox (combustion chamber).
Scrape thoroughly the firebox using the
scraper brush from the boiler cleaning
kit. Remove tar and soot deposits as
they obstruct normal heat radiation.
2.
Clean thoroughly water jacket ribs.
Remove cinder and soot deposits using
the scraper tool and brush from cleaning
kit.
3.
Remove inspection opening lid below
the boiler flue opening and remove ash
deposits in there.
Caution! Replace inspection
opening lid gasket wth a new
item if its integrity is broken.
4.
Clean well metal grill in the bottom
part of the boiler. Check whether gaps
between flue pipes are well cleaned. Tar
deposits or residues of non-combustive
materials inside the boiler firebox
deteriorate normal combustion process.
5.
Check for good sealing of doors:
- Open the doors of the boiler.
- Place four strips of paper sides of the
