background image

All PVG™ Series repair parts may be obtained through your local Burnham Wholesale distributor.  

Should you require assistance in locating a Burnham distributor in your area, or have questions 

regarding the availability of Burnham products or repair parts, please contact Burnham Customer 

Service at (717) 481-8400 or Fax (717) 481-8408.

Important Product Safety Information

Refractory Ceramic Fiber Product

Warning

:

The Repair Parts list designates parts that contain refractory ceramic fibers 
(RCF). RCF has been classified as a possible human carcinogen.  When 
exposed to temperatures about 1805°F, such as during direct flame contact, 
RCF changes into crystalline silica, a known carcinogen.  When disturbed as a 
result of servicing or repair, these substances become airborne and, if inhaled, 
may be hazardous to your health. 

AVOID Breathing Fiber Particulates and Dust

Precautionary Measures

:

Do not remove or replace RCF parts or attempt any service or repair work 
involving RCF without wearing the following protective gear: 

1.  A National Institute for Occupational Safety and Health (NIOSH) 

approved respirator 

2.  Long sleeved, loose fitting clothing 

3.  Gloves 

4.  Eye Protection 

•  Take steps to assure adequate ventilation. 

•  Wash all exposed body areas gently with soap and water after contact. 

•  Wash work clothes separately from other laundry and rinse washing 

machine after use to avoid contaminating other clothes.

•  Discard used RCF components by sealing in an airtight plastic bag.  RCF 

and crystalline silica are not classified as hazardous wastes in the United 
States and Canada. 

First Aid Procedures

:

•  If contact with eyes:  Flush with water for at least 15 minutes.  Seek 

immediate medical attention if irritation persists. 

•  If contact with skin:  Wash affected area gently with soap and water.

Seek immediate medical attention if irritation persists. 

•  If breathing difficulty develops:  Leave the area and move to a location 

with clean fresh air.  Seek immediate medical attention if breathing 
difficulties persist. 

•  Ingestion:  Do not induce vomiting.  Drink plenty of water.  Seek 

immediate medical attention. 

Содержание PVG Series

















Отзывы: