burmeier Lenus, Инструкция по эксплуатации, Страница: 25 / 100

Instruction Manual for Lenus Care Bed
Page 25
Proceed as follows:
Insert the angled plug of the thigh rest motor
into the connection socket on the thigh rest
motor as far as it will go and secure the plug
in place with the pull-out prevention device.
Insert the plug of the head-end lift
motor into the connection socket on the lift
motor as far as it will go and secure the plug
in place with the pull-out prevention
device 1 .
Insert the plug of the foot-end lift motor into
the connection socket on the lift motor as far
as it will go and secure the plug in place with
the pull-out prevention device 1 .
Only if necessary (usually the connection
socket is pre-installed in the factory): attach
the connection socket to the strain relief
plate, which is located under the mattress
base at the head end.
The strain relief plate has two openings: a for
beds powered via a power adapter and b for
beds powered via a 230-volt supply cable.
If a power adapter is used:
Insert the narrow end of the connection
socket into the larger opening a of the strain relief plate.
1