1
2
Image 5: Use the provided solid core
wire to wrap around the cables and pass
through from the rear of the chassis to
the front.
Image 7: Pull the cables towards the
front of the unit.
Image 6: When installing the BAD4M
into the B80 Chassis, make sure the
metal Daughter Card backplate (not the
PCB) is inserted into the card guides.
(BDA4M shown here)
Image 8: Attach the 4-pin connectors
(1/2 is on the top, 3/4 is on the bottom)
and the ribbon cable to the front panel.
Attach the front panel to the chassis us-
ing two thumb screws.
Image 9: With the B16 cover removed,
install the BAD4M into the card guides as
shown (BDA4M shown here). Make sure
the metal Daughter Card backplate, not
PCB, is inserted into the card guides.
Image 10: Pull the cables through to the
front of the chassis. Attach the 4-pin
connectors (1/2 is on the left, 3/4 is on
the right) and the ribbon cable to the
front panel. Attach the front panel to the
chassis using two thumb screws.
Installing B80 Mothership Daughter Cards
Installing B16 Mothership Daughter Cards
*NOTE- See B80 Mothership Quick Start Guide for more information
*NOTE- See B16 Mothership Quick Start Guide for more information
