Image 6: Use the provided solid core
wire to wrap around the cables and pass
through from the rear of the chassis to
the front as shown above.
Image 8: Pull the cables towards the
front of the unit.
Image 7: When installing the B22 Orca
into the B80 Chassis, make sure the
metal Daughter Card backplate (not the
PCB) is inserted into the card guides.
Image 9: Attach the digital and analog
connections to the front panel. Attach
the front panel to the chassis using the
thumb screws.
Image 10: With the B16 lid removed,
install the B22 Orca into the card guides
as shown here. Make sure the metal
Daughter Card backplate (not the PCB) is
inserted into the card guides.
Image 11: Pull the cables through to the
front of the chassis. Attach the digital
and analog connections to the front
panel. Attach the front panel to the chas-
sis using two thumb screws.
2. INSTALLING B22 INTO B80 MOTHERSHIP CHASSIS
INSTALLING THE B22 INTO THE B16 MOTHERSHIP CHASSIS
3