5
1
.
DANTE Ethernet Output. For units with a Dante “Brooklyn II” card installed.
(See page 8 for Dante config.)
2.
AES 1- Digital Output for Ch. L & R (with dual wire “off”), Ch. 1 (with dual wire “on” for 192kHz and 176kHz).
3.
AES 2- Digital Output for Ch. L & R (with dual wire “off”), Ch. 2 (with dual wire “on” for 192kHz and 176kHzt).
4.
TOSLINK-
Digital Output for Ch. L & R.
5.
S/PDIF-
Digital output for Ch. L & R.
6.
Word Clock Output-
Sends word clock out to other units.
7.
Word Clock Input-
Clock input for an external clock.
8.
Analog Input Trim- For fine tuning input levels
.
9.
Analog Input- Standard XLR input.
B2 ADC REAR UNIT CONNECTIONS:
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
Figure 5
B2 DAC REAR UNIT CONNECTIONS:
1.
DANTE Ethernet Input - For units with a Dante “Brooklyn II” card installed.
(See page 8 for Dante config.)
2.
AES 1 - Digital Input for Ch. L & R (No Dual Wire support)
3.
AES 2 - Digital Input for Ch. L & R (No Dual Wire support)
4.
TOSLINK -
Digital Optical S/PDIF Input for Ch. L & R.
5.
S/PDIF -
Digital S/PDIF Input for Ch. L & R.
6.
Word Clock Output -
Sends word clock out to other units.
7.
Word Clock Input -
Clock input for an external clock.
8.
Analog Output Trim - For fine tuning output levels
.
9.
Analog Output - Standard XLR output.
Figure 6
