Burkert MS08, Руководство по эксплуатации, Страница: 37 / 84

Type MS08
Sensor - Parameter
37
9 SENSOR - PARAMETER
Go to device SAC254 Sensor > function Sensor > tab Parameter .
Detailed view Parameter
Setting
Sensor Select the type of sensor connected to the ME63 interface.
Measure interval Set the interval for the automatic measurements.
Measure values Adjust the measure values (customer calibration).
SAC
Turb 530
CODeq
BODeq
TOCeq
Warning triggers Monitor values and configure when to display a warning.
Activation flag
SAC
SQI (Quality index)
Error triggers Monitor values and configure when to display a warning.
Activation flag
SAC
SQI (Quality index)
Hold value Temporarily freeze the values that are sent by the product on the fieldbus.
Set the Mode
Set the Action
Tab. 20: Settings in the “Sensor” configuration area, parameter detailed view
The menu items are detailed in the following chapters:
▪ Sensor , refer to chapter Select the type of sensor connected to the ME63 interface [
}
37] .
▪ Measure interval , refer to chapter Set the interval for the automatic measurements [ } 38] .
▪
Measure values , refer to chapter Adjust the measure values (customer calibration) [
}
38] .
▪ Warning triggers , refer to chapter Monitor the values of the water sample [
}
39] .
▪ Error triggers , refer to chapter Monitor the values of the water sample [
}
39] .
▪
Hold value , refer to chapter Freeze the values transmitted on the fieldbus [
}
40] .
9.1 Select the type of sensor connected to the ME63
interface
With this menu you select which sensor is connected to the ME63 interface. The interface can work only
with one sensor type. Each sensor needs one ME63 interface.
Make sure that the login user level is Installer . Refer to chapter Available login user levels [
}
35] .