Burkert 142 791, Руководство пользователя

Страница: 72 / 130

english
Operating instructions no. 801 148 71
Parameter structure of the DIAGNOSIS bit sequence
Bit Notation Description *
0 DIA_HW_ELECTR Hardware failure of the electronics R
4 DIA_MEM_CHKSUM Memory checksum error R
5 DIA_MEASUREMENT Failure in measurement R
10 DIA_CONF_INVAL Configuration not valid R
11 DIA_WARMSTART Re-start-up (coldstart up) carried out A
12 DIA_COLDSTART New-start-up (warmstart up) carried out A
13 DIA_MAINTENANCE Meintenance required R
Table 8: Diagnosis of the parameter coding of the physical block
Coding of the diagnosis parameters
Values of the diagnosis bits:
0 = not set
1 = set
* Display class:
R
Display is active as long as the reason for the message is still present
A Display will be automatically reset after reading.
The View Object Standard Parameters
Rel. Variable View_1 View_2 View_3 View_4
index
1 ST_REV 2
2 TAG_DESCRIPTION
3 STRATEGY
4 ALERT_KEY
5 TARGET_MODUS
6 MODUS_BLK 3
7 ALARM_SUM 8
Table 9: View Object of the Standard Parameters