Plus-X 600 Installation and Operation Manual Rev B
3
Settings
Click the
Settings
link on web page header to access the Plus-X 600 settings. Fill out the
following fields:
IP Address
Subnet Mask
Gateway
ARC Plus IP Address
You may optionally change the HTTP and Plus-X ports of the Plus-X 600. The default settings
are recommended.
Burk Technology recommends changing the Plus-X 600 password. The password is used to log
on to the onboard web interface. To change the password, check the
Change Password
box
and enter the new password in the
Password
and
Confirm
fields.
When you are finished, click
Save
.
Note: If you are unsure what network settings to use, contact your network administrator.
Plus-X 600 Settings
