Burg BCA78-ZKB, Инструкции по эксплуатации и монтажу, Страница: 30 / 80

Electrical connection of your hob
· Before proceeding with the electrical connection, verify that the current
carrying capacity of the system and the socket is adequate for the maximum
power rating of the hob.
· Electrical installation of the residence and the electrical current plug in
use must be earthed and conform with safety regulations.
· If there is no dedicated hob circuit and fused switch, they must be installed
by a qualified electrician before the hob is connected.
· The fused switch must be easily accessible once the hob has been
installed.
· Do not use adaptors, multiple sockets and/or extension leads.
· A circuit breaker with a contact opening of at least 3 mm, rated 32 A and
delayed functioning type must be installed in the supply circuit.
· The supply cable must be H05VV-F 3X2,5 mm² / 60227 IEC 53. You will
find the connection diagram shown on the back of your appliance.
· During installation, please insure that isolated cables are used. An incorrect
connection might damage your appliance. The guarantee will not cover
such damages.
· All repairs must be carried out by an authorised service personal or a
qualified electrician.
· Unplug your appliance before each maintenance. For reconnection, follow
the connection diagrams.
ELECTRICAL CONNECTION
4
6
3x2,5 mm² 220V~
3x2,5 mm² 230V~
3x2,5 mm² 240V~ 3x2,5 mm² 220V~
3x2,5 mm² 230V~
3x2,5 mm² 240V~ 5x1.5 mm² 380V 3N~
5x1.5 mm² 400V 3N~
5x1.5 mm² 415V 3N~ 5x1.5 mm² 380V 3N~
5x1.5 mm² 400V 3N~
5x1.5 mm² 415V 3N~
Supply cable connection can be differ according to terminal box type.
/