34 | English
BURGcam DOME 303
Option 2
WLAN / WPS installation:
•
Depending on the type of WLAN router you are using,
activate the WPS / WLAN function either by pushing
the respective WPS / WLAN button on the router or
by adjusting the appropriate WLAN settings in your
router. It is important that the different devices are
allowed to communicate with each other (disable the
guest access).
•
Quickly press the reset/WPS button on the camera
(max. 2 seconds) to connect the camera with the
corresponding WLAN router.
Note:
Only press this button quickly. If you press and
hold it longer (ca. 8 seconds) the camera will perform
a reset.
•
The router will assign an IP-address to the camera.
•
Insert the supplied CD into your PC / laptop drive and
start the Config Tool.
BURGcam SMART 3020
