background image

TSE BUSINESS 5000

English |

 

TSE Set 5012 FINGERSCAN

The electronic cylinder operates using a fingerscan. In addition, the  
cylinder can be operated by entering the 6-digit numeric code, or also  
using the optionally delivered TSE 5103 E-KEY.
In add. to that, you can also use the 6-digit numeric code, as well as 
the TSE 5103. E-Key in order to control the cylinder.

Up to 24 fingers can be programmed using the keypad. The users are 
created separately (USER XXX_FP). If a code and / or an E-KEY should 
additionally be assigned to a user, it needs to be created separately. 

Attention! 

The fingerscanner must not be cleaned with detergents. 

Please use a slightly moist cloth for this purpose.

TSE 5012 FINGERSCAN functions (standard)

–   Total number of users: up to 48, out of which 24 can  

be programmed with fingerscan

–  One E-KEY can be assigned to each code user (except administrator)
– Also a code can be assigned to every E-KEY user

Optional locking media

–   TSE 5103 E-KEY

Additional functions available using the optional TSE Software,  
for example:

– User administration
– Time and calendar functions
– Assignment of authorisations
– History functions

Administrator code

– Factory set to 1-2-3-4-5-6 (please be sure to change it)

Optical signalling

The optical signal in form of a LED is incorporated in the knob on 
the inner side of the door. This LED informs you on the following:
– 1 x brief: lock has been opened
– 2 x brief: lock has been shut
– every 5 sec. 1 × brief: permanent opening activated
– 1 × brief, 1 × long, 2 sec. pause, repetition: lock in programming mode
– 5 × brief, 2 sec. pause, repetition after 20 sec.: cylinder battery empty

Technical data

Blocking times

After 3 × wrong code is entered 1 minute,  
then always 3 minutes

Display

Adjustable to 12 languages

Power supply for 
keypad

2 x MIGNON LR6 AA ALKALINE

Power supply for 
cylinder

2 x MIGNON LR6 AA ALKALINE

Permissible ambient 
conditions

*

-15 °C / +50 °C / up to 93 %
rel. air humidity (noncondensing)
Allowed temperature range: -20 °C / +50 °C

As a result of extreme temperature changes, the 
display can react slowly or darken.

Keypad protection class

IP55

*  

In case the temperature exceeds the specified range, a corresponding warning message is 

indicated on the display. Provide for appropriate corrective action!

Содержание TSE 5011











Отзывы: