5
reached, turn the control knob slowly to the left until a click from the thermostat is heard. The
thermostat will cycle on and off to maintain the temperature.
Serving
•
The safety tap is locked or unlocked by twisting it so that the closed or opened padlock
symbol is lined up with the white dot on the tap body.
•
There are two open positions, one self- holding so that the tap remains open, and the
other self-closing so that the tap closes as soon as the lever is released. To change the
tap position, turn the tap lever through 180°.
•
Open the tap by depressing the tap lever into the horizontal position.
•
Close the tap by returning the lever to a vertical position.
After use
•
Switch off to 0 and disconnect from the mains supply.
•
Water may be left in the urn when it is not in use for short periods, but to maintain a
supply of fresh water, it should be emptied periodically and cleaned out.
•
WARNING: Only move when disconnected and empty.
Protective cut-out
The heating element is fitted with a thermal cut-out which protects the urn from damage if it is
allowed to boil dry or is switched on without water. If this happens, allow the urn to cool down
then press the reset button situated under the base. If this happens, allow the urn to cool,
drain the water then press the reset button, situated on the base.
In order to ensure correct operation of this cut-out it is essential to keep the heating element
free from scale. Failure to do this will result in the cut-out operating before the water has
boiled.
Cleaning
WARNING Disconnect from the mains supply before cleaning and allow the
urn to cool.
IMPORTANT Do not immerse the urn in water or any other liquids and take
care to keep water away from the mains lead and connections.
IMPORTANT Do not use any abrasive cleaning fluids or materials.
•
Wash out the urn. Use clean water and a soft cloth.
•
Brush any scale or sediment from the element.
•
Rinse thoroughly and buff with a dry cloth.
