2
•
Do not dismantle any part of the urn. Responsibility cannot be accepted if this
instruction is ignored.
•
Do not place the urn on or near hot surfaces.
•
Do not use accessories or attachments which are not recommended or sold by Burco
Appliances as they can cause hazards.
•
This appliance must only be used for heating water.
•
Always switch off and disconnect the urn from the mains supply when not in use or
when cleaning.
•
To prevent any risk of electrocution do not immerse the urn in water or any other liquid
when cleaning and do not allow any water or liquid to come into contact with any of the
electrical connections or controls.
•
Do not allow the cord to hang over the edge of the work surface, to touch wet or hot
surfaces or become twisted.
•
The urn should not be lifted whilst connected to the mains.
•
The urn should not be carried whilst it contains water.
•
Maintenance other than cleaning should be performed by the manufacturer while this
product is within guarantee (contact our service help line) or otherwise by a qualified service
engineer.
•
This appliance is not suitable for installations in an area where a water jet could be
used.
•
This appliance is not to be intended for use by persons (including children) with reduced
physical, sensory or mental capabilities or lack of experience and knowledge unless they have
been given supervision or instruction concerning use of the appliance by a person responsible
for their safety. Children should be supervised to ensure that they do not play with the
appliance
•
This appliance must not be cleaned by a water jet.
•
This appliance is only to be installed in locations where its use and maintenance is
restricted to trained personnel.
•
For correct operation this appliance should be operated in an ambient temperature
between 22-28 °C.
Installation
Preparation
•
Remove any plastic film from the urn and wipe over all surfaces with a damp cloth.
